manualshive.com logo in svg

Sharp MX-M264N, Operation Manual, Page: 47 / 799

Share
Download
Sharp MX-M264N Operation Manual Download Page 47

1-6

BEFORE USING THE MACHINE

Contents

SIDE AND BACK

(1)

Service-only connector

(2)

LAN connector

Connect the LAN cable to this connector when the 
machine is used on a network.
For the LAN cable, use a shielded type cable.

(3)

USB connector (B type )

Supports USB 2.0 (Hi-Speed).
A computer can be connected to this connector to use 
the machine as a printer.
For the USB cable, use a shielded cable.

(4)

USB connector (A type)

Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as USB 
memory to the machine.

(5)

Power plug

(6)

Extension phone jack

When the fax function of the machine is used, an 
extension phone can be connected to this jack.

(7)

Telephone line jack

When the fax function of the machine is used, the 
telephone line is connected to this jack.

When the fax expansion kit is installed

(1)

(2)

(3)

(4)

(5)

Caution

This connector is for use only by service technicians.
Connecting a cable to this connector may cause the 
machine to malfunction.

Important note for service technicians:
The cable connected to the service connector must be 
less than 118" (3 m) in length.

(6)

(7)

Summary of Contents for MX-M264N
































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments