manualshive.com logo in svg

Sharp MX-M264N, Operation Manual, Page: 129 / 799

Share
Download
Sharp MX-M264N Operation Manual Download Page 129

2-31

COPIER

Contents

OUTPUT

To select output functions and the output tray, touch the [Output] key in the base screen of copy mode. Output functions 
that can be selected are sort, group, offset, and staple sort. All explanations of the settings below assume that a finisher 
is installed.

(1)

[Offset Tray] key ([Center Tray] key*)

Output is delivered to the offset tray. The [Offset Tray] 
key is automatically selected when the [Staple Sort] key 
is selected.

(2)

[Offset] key

This is used to offset each set of output from the previous 
set.
The offset function operates when the checkbox is 
selected 

 and does not operate when the checkbox is 

not selected 

. (The offset checkmark is automatically 

cleared when the staple sort function is selected.)

☞

Offset function

 (page 2-32)

(3)

[Sort] key

This is used to sort (collate) output into sets.

☞

Sort mode

 (page 2-32)

(4)

[Staple Sort] key

This is used to sort output into sets, staple each set, and 
deliver the sets to the tray. (Note that the sets will not be 
offset in the output tray.)

☞

Staple sort function

 (page 2-33)

(5)

[Group] key

This is used to group copies by page.

☞

Group mode

 (page 2-32)

(6)

Output display

An icon will appear to indicate the output mode.

(7)

[Right Tray] key

Select this key to have output delivered to the right tray.
When the right tray is selected, offset, staple, and sort 
cannot be selected.

(8)

[OK] key

Touch this key to close the output screen and return to 
the base screen.

OK

Output

Sort

Right Tray

Offset

Offset

Tray

Staple
Sort

Group

(6)

(7)

(8)

(3)

(4)

(5)

(1)

(2)

The above screen shows the keys that appear when a finisher is installed. The keys that appear will vary depending on what 
peripheral devices are installed.
In addition, it may not be possible to select some keys depending what peripheral devices are installed. If your screen is 
different from the screen of previous page, see the screens that follow.

Example

The screen when a finisher is not installed.

Sort

Group

Offset

Output

OK

Summary of Contents for MX-M264N
































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments