manualshive.com logo in svg

Sharp MX-M264N, Operation Manual, Page: 760 / 799

Share
Download
Sharp MX-M264N Operation Manual Download Page 760

8-9

TROUBLESHOOTING

Contents

PAPER MISFEED ILLUSTRATIONS

If you require more information when reading the instructions in the touch panel, see the paper misfeed illustrations 
below. Refer to the illustration below and then go to the appropriate illustration (1 to 7) for your situation.

☞

(1)-(3): page 8-9, (4)-(10): page 8-11

(1) Original misfeed

Open the document feeder 
cover and remove the misfed 
originals.

Pull out the document feeder 
tray and remove the misfed 
paper.

Open the automatic 
document feeder. Rotate the 
transfer roller in the direction 
of the arrow and remove the 
original.

(2) Paper misfeed in the output area

Pull the misfed paper out to 
the output tray to remove it.

(3) Paper misfeed in the fusing unit

Open the bypass tray, and 
then grasp the handle on the 
side cover and pull out the 
side cover.

Gently open the front cover.

Rotate the roller knob.

(1)

(2)

(7)

(6)

(3) (4)

(5)

Summary of Contents for MX-M264N
































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments