Sharp MX-3070N User Manual Download Page 83

Page: 83 / 859

1-80

BEFORE USING THE MACHINE

►

STOPPING/DELETING A JOB, PRIORITY PROCESSING AND CHECKING THE STATUS

"Received"

Printed received fax data.

The fax has been received.

The received data (each file) was stored.

"Forward OK"

The received data/received data (each file) has been forwarded.

"FAST communications in
progress"

"FAST communications in progress"

"Stopped"

The job was stopped.

"Delete"

Deleted received data in the image check screen.

"Number of successful
transmission
destinations/Total
destinations OK"

Completion of a broadcast transmission, serial polling, or inbound routing operation.

If transmission to 3 destinations was successful out of a total of 5, "003/005 OK" will appear.

"No response"

An error occurred because there was no response from the destination.

"Busy"

An error occurred because the other party was busy.

"OK REPORT"

A "Successful reception" reply received

"NG REPORT"

A "Delivery error" reply received

"NO REPORT"

Delivery Confirmation Receive Timeout

"E-mail received"

E-mail other than Internet fax received

"Rejected"

A fax was sent from a party that has been blocked by the anti junk fax function.

"NGxxxxxx"

Transmission/reception was not successful because a communication error occurred (a 6-digit
error code appears in xxxxxx.)

"Error"

An error occurred while the job was being executed.

Display

Status

Summary of Contents for MX-3070N




























































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-3070N

Reviews:

Related manuals for MX-3070N

Brands by name

Popular brands

Sharp MX-3070N, User Manual

Search results

Summary of Contents for MX-3070N

Reviews:

Related manuals for MX-3070N

Brands by name

Popular brands