manualshive.com logo in svg

Sharp MX-3070N, User Manual

Share
Download
Sharp MX-3070N User Manual Download Page 131

1-128

BEFORE USING THE MACHINE

►

MAINTENANCE

6

Close the front cover.

After the toner cartridge is replaced, the machine 
automatically enters image adjustment mode. Do not open 
the front cover while this is occurring.

• Do not throw a toner cartridge into a fire. Toner may fly and cause burns.
• Store toner cartridges out of reach of small children.
• If a toner cartridge is stored on end, the toner may harden and become unusable. Always store toner cartridges on their 

side.

• If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality and 

performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.

• If any one of the toner colors runs out (including black toner), color printing will no longer be possible.

If the Y, M, or C toners run out but a quantity of Bk toner still remains, printing is performed in black and white.

• Depending on your conditions of use, the color may become light or the image blurred.

• Be sure to install four toner cartridges (Y/M/C/Bk).
• Keep used toner cartridges in a plastic bag (do not discard them). Your service technician will collect used toner cartridges.
• To view the approximate amount of toner remaining (indicated in %), hold down the [Home Screen] button during printing 

or in standby mode. When the percentage falls to "25-0%", keep a toner cartridge for replacement purposes before toner 
runs out.

• When the toner cartridge provided with the machine is installed, the percentage of toner remaining displayed from the 

beginning is "50-25%". (The number of pages that can be printed with the starter toner cartridge included with the machine 
is less than a regular cartridge.)

• When toner runs out while the home screen is displayed, the [Toner Empty] message appears in the upper right corner of 

the screen.

To manually remove the toner cartridge

Set the toner cartridge to be removed with "Setting mode (administrator)" 

→

 [System Settings] 

→

 [Image Quality Adjustment] 

→

 [Remove Toner Cartridge].

Summary of Contents for MX-3070N




























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands