7-77
►
Copy Function Settings
Default Settings
The following settings are related to copying.
Default settings selected with these settings apply to all functions of the machine (not just the copy function).
Rotation Copy Setting
When the original and paper are placed in different orientations, this function automatically rotates the image 90 degrees
to enable correct copying on the paper.
Disable Copy in Different Size/Direction
You can prohibit copying when the orientation of the copy paper is different from the orientation of the original, or when the
appropriate copy paper size is not loaded.
Add or Change Extra Preset Ratios
Add two enlargement preset ratio values (101% to 400%) and two reduction preset ratio values (25% to 99%).
Also, you can change the preset ratio if necessary.
Setting a Maximum Number of Copies
This is used to set the maximum number that can be entered for the number of copies (number of continuous copies).
Any number from 1 to 9999 can be specified.
Initial Margin Shift Setting
This is used to set the default margin shift amount. Specify a value from 0" (0 mm) to 2" (50 mm) in increments of 1/8" (3
mm) for both the front and reverse sides.
Erase Width Adjustment
This is used to set the default erase width for erase function. Specify a value from 0" (0 mm) to 1" (25 mm) in increments
of 1/8" (3 mm) for both edge erase and center erase.
Initial Multi Shot Setting
Set the default state for Multi Shot. Select the page layout for Multi Shot, whether or not borders are added, and if
added, whether the borders are solid lines or dotted lines.
Enable the Rotation Copy setting to copy an 5-1/2" x 8-1/2" (A5) size original on 5-1/2" x 8-1/2"R (A5R) paper.
This setting is enabled when "
Rotation Copy Setting (page 7-77)
" is disabled.
Preset ratios other than added preset ratios cannot be changed.
