manualshive.com logo in svg

Sharp MX-3070N, User Manual, Page: 30 / 859

Share
Download
Sharp MX-3070N User Manual Download Page 30

1-27

BEFORE USING THE MACHINE

►

BEFORE USING THE MACHINE

Each Energy Save settings in the Power Management Setting is not applied when Custom/Eco mode is used. 

AUTO POWER SHUT-OFF TIMER

This mode turns off the power to the operation panel and the fusing unit, and makes the machine wait in the lowest 
power consumption state.
Auto Power Shut-Off Timer will activate when the set duration of time elapses in waiting status without executing a job.
Compared to preheat mode, the power-saving rate is considerably higher but the wakeup time is longer.

The [Power Save] button blinks when the machine is in Auto Power Shut-Off Timer.

Auto Power Shut-Off Timer is also activated by pressing the [Power Save] button while the [Power Save] button is not lit.
This mode is cleared when print data is being received, fax data is being output, or when the [Power Save] button is 
pressed while it is blinking.

A message appears 15 seconds before Auto Power Shut-Off Mode is entered.
To close the message and continue normal operation, tap the [Continue] button.
The message appears again 15 seconds before the end of the extension of normal operation time.
If no action is taken within 15 seconds after the message appears, the machine enters auto power shutoff mode.

PREHEAT MODE

This mode lowers the temperature of the fusing unit and makes the machine wait in low power consumption state.
Preheat mode will activate when the set duration of time elapses in waiting status without executing a job.
Compared to Auto Power Shut-Off Timer, the amount of energy saved is less and the wakeup time is shorter.
In the preheat mode, the [Home Screen] button is lit and the light goes off for the touch panel and the [Power Save 
Mode] button.

Sleep Mode Power Level

Low Power

Low Power

To set mode settings

"Setting mode  (administrator)" 

→

 select  [System Settings] 

→

 [Energy Save] 

→

  [Eco Mode Settings] 

→

 [Mode Setting].

To set Auto Power Shut-Off Timer:

In "Setting mode (administrator)", select  [System Settings] 

→

 [Energy Save] 

→

 [Eco Mode Settings] 

→

 [Auto Power 

Shut-Off].

To set display of the message:

In "Setting mode (administrator)", select  [System Settings] 

→

 [Energy Save] 

→

 [Eco Mode Settings] 

→

 [Auto Power 

Shut-Off].

Function

Custom

Eco

[Power Save] button/indicator

Summary of Contents for MX-3070N




























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments