Sharp MX-3070N User Manual Download Page 121

Page: 121 / 859

1-118

BEFORE USING THE MACHINE

►

MAINTENANCE

Clean the main charger.

(1) Gently push the charger cleaner all the

way in.

(2) Gently remove the charger cleaner.

Insert it so that label (A) on the cleaning target side and label
(B) on the charger cleaner side are oriented as shown.

Repeat step 4 with all other main
chargers.

There are a total of 4 places to be cleaned in the machine as
shown.

Replace the charger cleaner in its
original position.

(1) Fit the charger cleaner onto the boss and

rotate. Hook the end (without a handle)
onto the left hook.

(2) Put the right-hand side of the charger

cleaner over the hook to place it on the
back side.

(3) Turn the charger cleaner onto hook.

Push the toner collection container
into the machine.

Push the container in until it clicks into place.

(B)

(A)

(B)

Main charger

Boss

(3)

(2)

Summary of Contents for MX-3070N




























































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-3070N

Reviews:

Brands by name

Popular brands

Sharp MX-3070N, User Manual

Search results

Summary of Contents for MX-3070N

Reviews:

Brands by name

Popular brands