AR-M350 SIMULATIONS 10-6
50
1
Used to adjust the document scan position, the image print
position, and the void area (image loss).(A similar adjustment
can be made with SIM 50-2 (simple method).)
Adjustment
Picture
quality
Picture
position
2
Used to adjust the document scan position, the image print
position, and the void area (image loss).(This simulation allows
simple procedure of the similar adjustment to SIM 50-1.)
Adjustment
Picture
quality
Picture
position
6
Document scan position adjustment. (DSPF)
Adjustment
Picture
quality
7
Document scan position adjustment (Simple method) (DSPF)
Adjustment
Picture
quality
10
Used to adjust the print image center position.
(Adjusted for each paper feed section.)
Adjustment
Image process (ICU)
Picture
quality
Picture
position
12
Used to adjust the reading image center position.
(Adjusted for each document mode.)
Adjustment
Image process (ICU)
Picture
quality
Picture
position
51
2
Used to adjust the contact pressure of paper on the resist roller
in each section (machine paper feed, duplex paper feed, SPF
paper feed). (This adjustment is required when the print image
position varies or when paper jam occurs frequently.)
Adjustment
Paper transport
(paper exit,
switchback, transport)
Operation
53
6
Used to adjust the DSPF width detection level.
Adjustment
Operation
7
Used to enter the adjustment value of SPF width detection.
Adjustment, setup,
operation data output,
check (display, print)
SPF/ADF/RADF/UDH
Operation
60
1
Used to check the ICU (DRAM) operation (read/write).
(SIMM memory, Onboard memory)
Operation test, check
Image process (ICU)
Operation
61
1
Used to check the operations of the LSU unit.
Operation test, check
Operation
2
Used to adjust laser power (absolute value) in the copy mode. Adjustment
Operation
3
Used to adjust laser power
(absolute value) in the FAX reception mode.
(Only when FAX is installed.)
Adjustment
Operation
4
Used to adjust laser power
(absolute value) in the printer mode.
Adjustment
Operation
62
2
Used to check the hard disk operation (read/write).
(Only for the model with the hard disk) (Partial check)
Operation test, check
Memory
Operation
3
Used to check the hard disk operation (read/write).
(Only for the model with the hard disk) (All area check)
Operation test, check
Memory
Operation
63
1
Used to check the shading correction result.
(The shading correction data are displayed.)
Adjustment, setup,
operation data output,
check (display, print)
Scanner (exposure)
Operation
2
Used to execute shading.
Adjustment, setup,
operation data output,
check (display, print)
Scanner (exposure)
Operation
7
Used to adjust the white plate scan start position in shading
white correction.
Adjustment
Scanner (exposure)
Operation
64
1
Used to check the operations of the printer section
(self printing). (The print pattern, paper feed mode, print mode,
print quantity, density can be changed optionally.)
Operation test, check
Printer
Operation
65
1
Used to adjust the touch panel (LCD display section) detecting
position.
Adjustment
Operation
(display, operation)
2
Used to check the result of the touch panel
(LCD display section) detecting position adjustment.
(The coordinates are displayed.)
Adjustment, setup,
operation data output,
check (display, print)
Operation
(display, operation)
Code
Function (Content)
Purpose
Section
Item
Main Sub
* !"#$%&
