AR-M350 SIMULATIONS 10-4
26
41
Used to set Enable/Disable of the magnification ratio auto
selection function (AMS) in the pamphlet copy mode.
Setup
Spec
Operation
mode
(Common
operation)
52
Used to set Enable/Disable of count-up when white paper is
discharged. (White paper means the index paper
(without copying) in the OHP index paper insertion mode,
the front/rear covers (without copying) in the cover insertion
mode, and white paper in the duplex exit mode (CA, etc.).)
Setup
Paper transport
(Paper exit,
switchback, transport)
27
1
Used to set the operation specifications when a communication
trouble occurs between the host computer and MODEM
(machine side). (When a communication trouble occurs
between the host computer and MODEM (machine side), self
diag display (U7-00) is displayed and setup is made to inhibit or
allow printing. )
Setup
Communication
(RIC/MODEM)
Spec
Operation
mode
(Common
operation)
5
Used to enter the machine tag No. (This function allows to
check the machine tag No. from the computer.)
Setup
Communication
(RIC/MODEM)
Data
30
1
Used to check the operations of the sensors and detectors in
the paper feed, paper transport, and paper exit sections and
their control circuits.
Operation test, check
Operation
2
Used to check the operations of the sensors and detectors in
the paper feed section and their control circuits.
(The operations of the sensors and detectors in the paper feed
section can be monitored on the LCD display.)
Operation test, check
Paper feed
Operation
40
1
Used to check the operations of the manual paper feed tray
paper size detectors and their control circuit.
(The operations of the manual paper feed tray paper size
detectors can be monitored on the LCD display.)
Operation test, check
Paper feed
Operation
2
Used to adjust the detection level of the manual paper feed tray
paper width detector.
Adjustment
Paper feed
Operation
7
Used to enter the adjustment value of the manual paper feed
tray width detection level.
Adjustment, setup
Paper feed
Operation
11
Used to check the width detection level of the multi purpose
tray paper width detector.
Operation test, check
Paper feed
Operation
12
Used to adjust the width detection level of the multi purpose
tray paper width detector.
Adjustment, setup
Paper feed
Operation
41
1
Used to check the operations of the document size sensor and
the related circuit. (The operation of the document size sensor
can be monitored on the LCD display.)
Operation test, check
Other
Operation
2
Used to adjust the detection level of the document size sensor. Adjustment
Other
Operation
3
Used to check the operations of the document size sensor and
the related circuit. (The output level of the document size
sensor can be monitored on the LCD display.)
Operation test, check
Other
Operation
43
1
Used to set the fusing temperature in each operation mode.
Setup
Fusing, paper exit
44
1
Used to set Enable/Disable of each correction operation in the
image forming (process) section.
Setup
Process (OPC drum,
developing, transfer,
cleaning)
Operation
4
Used to set the target image (reference) density level in the
developing bias voltage correction.
Setup
Process (OPC drum,
developing, transfer,
cleaning)
Data
9
Used to check the result (main charger grid voltage developing
bias voltage, laser power, etc.) of correction
(process correction) in the image forming section.
(By this simulation, the correction operation can be checked.)
Adjustment, setup,
operation data output,
check (display, print)
Process (OPC drum,
developing, transfer,
cleaning)
Data
Operation
data
(machine
condition)
Code
Function (Content)
Purpose
Section
Item
Main Sub
( !"#$%&
