AR-M350 SIMULATIONS 10-61
<Country codes>
*
The codes other than the above are recognized as Japan.
*
Conforms to Advisory Document T.35.
<List of display values>
<Items>
66-2
Purpose
Data clear
Function (Content)
Used to set the FAX soft switch setup to the
default. (Except for the adjustment values)
Section
Fax
Item
Data
Operation/Procedure The current set value of SW1 is displayed.
Entry of 1 - 8 only is effective.
1) Specify the bit to be changed (highlighted)
with a number.
2) Select the country code, and press START to
rewrite the setting.
3) Select a number (1 - 2) with 10 digit key pad
and press START to execute.
1: FAX soft SW clear 2: Not clear
4) The soft switch (excluding the FAX adjustment
value) corresponding to the selected country
code is cleared.
5) The selected country is highlighted.
Japan
0
U.S.A.
10110101
Australia
1001
U.K
10110100
France
111101
Germany
100
Canada
100000
Netherlands
1111011
1
JAPAN
SIMULATION 66-2
FAX SOFT SW. CLEAR.
ARE YOU SURE?
1:YES
2:NO
00000000
SIMULATION 66-2
FAX SOFT SW.CLEAR (WIHTOUT ADJUSTMENT VALUE).
INPUT COUNTRY CODE, AND PRESS START.
1 2 3 4 5 6 7 8
Press [START] key.
66-3
Purpose
Operation test, check
Function (Content)
Used to check the operations of FAX PWB
memory (read/write).
(This adjustment is required when replacing the
PWB with a new one.)
Section
Fax
Item
Data
Operation/Procedure Check the FAX PWB memory.
When this simulation is executed, the error
occurring address or the data line is displayed.
NO CHECK
Not checked
CHECKING
Checking
OK
Check complete OK
NG
Check error
MFP SRAM (MFP control PWB)
SRAM
MFP FLASH (FAX I/F PWB)
FLASH Memory (AR-MM9)
MFP OP.FLASH (FAX I/F PWB)
MODEM EEPROM (FAX PWB)
MODEM SRAM(G/A) (FAX PWB)
MODEM SRAM (FAX PWB)
MODEM SDRAM (FAX PWB)
SIMULATION 66-3
FAX PWB MEMORY CHECK.
MFP SRAM: CHECKING
MFP FLASH: NO CHECK
MFP OP. FLASH: NO CHECK
MODEM EEPROM: NG:A0010000
MODEM SRAM(G/A):NO CHECK
MODEM SRAM: NG A11
MODEM SDRAM: OK
, !" #$%&'
