Sharp AR-M350 Imager Service Manual Download Page 97

Page: 97 / 158

AR-M350 SIMULATIONS 10-36

<List of set values 1>

<List of display values 1>

<List of set values 2>

<List of set values 3>

Main code 46

46-2

Purpose

Adjustment

Function (Content)

Used to adjust the copy density in the copy mode
(binary, auto, text, text/photo, photo mode).
An adjustment with this simulation affects all the
reading density adjustment values.

Section
Item

Picture quality

Operation/Procedure The exposure mode to be set is selected.

(Auto adjustment)
1) The current set value is highlighted on the

right side of each item. In this screen, be sure
to select "1: COPY START." (Set value: 1)

2) Set the exposure level with 10 digit key pad.

Press P to store the set value.
(Default: 50, set range: 0 - 99)

3) Press START, and copying is started and the

set value is stored. (Display value 1)

4) Select a paper feed tray. (Set value 2)
5) Select an exposure level. (Set value 3)

SIMULATION 46-2
EXP. LEVEL SETUP (2). SELECT 0-6, AND PRESS START.
0. TRAY SELECT

1. COPY START

2. EXP LEVEL
3. AE 3.0

4. CH 3.0

5. MIX 3.0

6. PHOTO 3.0

SIMULATION 46-2
EXP. LEVEL SETUP (2). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT

SIMULATION 46-2
EXP. LEVEL SETUP (2). NOW COPYING.

SIMULATION 46-2
EXP. LEVEL SETUP (2). SELECT 3-6, AND PRESS START.
(EXP. LEVEL SELECT)
3. AE 3.0 4. CH 3.0
5. MIX 3.0 6. PHOTO 3.0

SIMULATION 46-2
EXP. LEVEL SETUP (2),INPUT VALUE 0-99, AND PRESS START.
3. AE 3.0

Press [CUSTOM SETTING] key.

Select other than 0 - 2,
and press [START] key.

Select 1, and
press [START] key.

Select 2, and
press [START] key.

Select 0, and
press [START] key.

Press [START] key.

Press [START] key or
press [CUSTOME SETTING] key.

Press [CUSTOM SETTING] key.
Or copying is terminated.

Paper feed tray selection

Copy start (Default)

Exposure level selection

AE mode

Text mode 30

Text/Photo mode 30

Photo mode 30

Normal display

NOW COPYING

ERROR display

Door open

DOOR OPEN.

Jam

JAM

paper empty

PAPER EMPTY.

TRAY1

TRAY2

TRAY3

TRAY4

Manual feed

AE mode

Text mode 30

Text/Photo mode 30

Photo mode 30

!" #$%&

Summary of Contents for AR-M350 Imager































































































































































Search results

Summary of Contents for AR-M350 Imager

Reviews:

Related manuals for AR-M350 Imager

Brands by name

Popular brands

Sharp AR-M350 Imager, Service Manual

Search results

Summary of Contents for AR-M350 Imager

Reviews:

Related manuals for AR-M350 Imager

Brands by name

Popular brands