Sharp AR-M350 Imager, Service Manual

Page: 120 / 158

AR-M350 SIMULATIONS 10-59
<List of set values>
<Print pattern>
Main code 64
64-1
Purpose Operation test, check
Function (Content) Used to check the operations of the printer
section (self printing).
(The print pattern, paper feed mode, print mode,
print quantity, density can be changed
optionally.)
Section Printer
Item Operation
Operation/Procedure Perform self printing. The current set data is
displayed on the right side of the menu.
SIMULATION 64-1
SELF PRINT MODE. SELECT 0-7, AND PRESS START.
0.TRAY SELECT
: 1.PRINT START
2.PRINT PATTERN : 3.DENSITY :
4.MULTI : 5.MODE :
6.LEVEL : 7.DUPLEX :
1
87
1
1
1
1
1
1
SIMULATION 64-1
SELF PRINT MODE... EXECUTING...
0.TRAY SELECT
:
2.PRINT PATTERN : 3.DENSITY :
4.MULTI : 5.MODE :
6.LEVEL : 7.DUPLEX :
1
87
1
1
1
1
1
0
SIMULATION 64-1
SELF PRINT MODE. SELECT 1-8, AND PRESS START.
(MODE)
1.STANDARD
2.SMOOTHING 3.TONER SAVE 4.HALF TONE
5.SM TONER SAVE 6.SM HALF TONE
7.TONER SAVE+ HALF TONE
8. SM TONER SAVE+ HALF TONE
1
SIMULATION 64-1
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(PRINT PATTERN)
INPUT 50-99.
87
(2)
SIMULATION 64-1
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(DENSITY)
1-255
100
(3)
SIMULATION 64-1
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(MULTI COUNT)
1-999
1
(4)
SIMULATION 64-1
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(LEVEL)
1-5
3
(6)
(5)
SIMULATION 64-1
SELF PRINT MODE. SELECT 1-5, AND PRESS START.
(FEED TRAY)
1.TRAY1
2.TRAY2 3.TRAY3 4.TRAY4 5. BPT
1
(0)
SIMULATION 64-1
SELF PRINT MODE. SELECT 1-2, AND PRESS START.
(DUPLEX)
1.NO
2.YES
1
(7)
Press [CUSTOM SETTING] key
or [START] key.
Select 1, and
press [START] key.
0 Paper feed tray 1: TRAY1
2: TRAY2
3: TRAY3
4: TRAY4:
5: MANUAL
1 Print execution Print is started with the set data.
2 Print pattern Refer to the print pattern.
3 Picture density Enable only when No. 79, 80, or 84 is selected.
4 Print quantity -
5 Print mode 1: Standard
2: Smoothing ON
3: Toner save ON
4: Half tone ON
5: Smo Toner save
6: Smo Half tone
7: Toner save + half tone
8: Smo Toner save + Half tone
6 Print level 1 ~ 5
7 Duplex 1: Single print
2: Duplex print
50 Total surface 1BY1 (Vertical) 70 Scaled print adjustment pattern
(Vertical)
51 Total surface 1BY1
(Horizontal)
71 Grid pattern
52 Total surface 1BY2 (Vertical) 72 Slant line 45 degrees
53 Total surface 1BY2
(Horizontal)
73 Slant line 26.6 degrees
54 Total surface 1BY3 (Vertical) 74 Slant line 63.4 degrees
55 Total surface 1BY3
(Horizontal)
75 ID-BG pattern
56 Total surface 1BY4 (Vertical) 76 Dot pattern 12.5%
57 Total surface 1BY4
(Horizontal)
77 Dot pattern 28%
58 Total surface 1BY5 (Vertical) 78 Dot pattern 50%
59 Total surface 1BY5
(Horizontal)
79 Whole surface error diffusion
background
60 Total surface 2BY2 (Vertical) 70 Whole surface dither process
background
61 Total surface 2BY2
(Horizontal)
81 1 block 128 pixels/
every 32 gradations
62 Total surface 2BY3 (Vertical) 82 1 block 128 pixels/
every 16 gradations
63 Total surface 2BY3
(Horizontal)
83 1 block 128 pixels/
every 8 gradations
64 Whole surface background
copy
84 Memory check pattern
65 Special pattern (Vertical) 85 Cleaning check pattern
66 1 block 128 pixels/
every 32 gradations
86 Offset check pattern
67 1 block 128 pixels/
every 16 gradations
87 Test B image (for aging)
68 1 block 128 pixels/
every 8 gradations
88 Printer 6%
69 11-do t pattern 89 Printer 5%
98 List of setup values
*) !" #$%&'