AR-M350 MACHINE OPERATION 8-3
(2) Adjustment values saved in SCANNER
(3) Adjustment values saved in MFP controller
5. Key operator program
Counters
Adjustment values
Others
Scan counter
Original lead edge adjustment value
Exposure mode setup value
SPF paper pass counter
Original off-center adjustment value
Serial number
SPF stamp counter
Original image loss quantity adjustment value
Magnification ratio adjustment value
SPF resist quantity adjustment value
Exposure motor speed adjustment value
Platen original detection adjustment value
SPF width detection adjustment value
Touch panel adjustment value
Exposure level adjustment value
Gamma change value
OC/SPF exposure correction value
Shading adjustment value (CCD/CIS)
CCD shading start position adjustment value
Counters
Adjustment values
Others
Copy counter
FAX SOFT SW. etc.
Trouble history
Printer counter
Jam history
FAX reception counter
Destination setup
FAX transmission counter
Language setup
Trouble counter
Toner save mode setup
Jam counter
13" setup
Auditor setup
Serial number
Middle binding mode AMS setup
PC/Modem communication trouble detection
YES/NO setup
Tag number setup
γ
change value
Exposure mode setup
OC/SPF exposure correction value
Printer setup values
Network setup values
KEY OPERATOR PROGRAM
Set value(Default)
Remark
Engine section LCD
Copy function
settings
Initial status settings
Paper tray,
exposure mode
copy ratio,
duplex mode
output mode
Exposure adjustment
1~5*~9
Rotation copy setting
Auto paper selection
setting
600dpi x 600dpi scanning
mode
600x300dpi*/600x600dpi
Quick scan from document
glass
600x300dpi*/600x600dpi*
Device control Original size detector
setting
INCH-1/INCH-2/AB-1*/AB-2
Disabling of document
feeder
Scan to
E-mail initial
status settings
Default sender set
Initial file format setting
Compression mode
at broadcasting
( ! "#$%&
