Sharp AR-FX4 Operation Manual Download

Page: 96 / 176

F-CODE COMMUNICATION

F-c

ode

Comm

unic

tio
n

Press the SPECIAL FUNCTION key, select "SENDING OPTIONS" with
the

key, and then press the OK key.

Press the

key to select "SUB ADD POLLING" and then press

the OK key.

Enter the fax number of the other machine with the numeric keys, and
then press the OK key.

●

Only one fax number can be entered.

●

You can also use a rapid dialing, a Speed Dial number, or the REDIAL key.

Enter the sub-address (up to 20 digits) with the numeric keys and then
press the OK key.

●

Characters that can be entered are numbers, #,

, and spaces. However, the initial

character cannot be a space.

●

If you used a rapid dialing or Speed Dial number that has a sub-address programmed,
the sub-address is displayed.

●

To correct the sub-address, press the CLEAR key and re-enter it.

Enter the passcode (up to 20 digits) with the numeric keys and then
press the OK key.

●

Characters that can be entered are numbers, #,

, and spaces. However, the initial

character cannot be a space.

●

If you used a rapid dialing or Speed Dial number that has a passcode programmed, the
sub-address is displayed.

●

If a passcode is not required, press the OK key.

●

You do not need to enter a passcode if the other machine does not have one
programmed.

Press the START key.

Select F-code polling

Reception

Polling

Transmission

Allows F-code polling

Beep

Scan original into memory

Memory

Your machine initiates reception of a fax stored in the F-code memory polling box of another machine.

A timer setting can also be specified. (Timer Transmission: page 72)

To box

F-code memory

polling box

Other

machine

Your

machine

DQQMࡍ࡯ࠫ㧞㧜㧜㧝ᐕ㧣᦬㧝㧣ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧡㧢ಽ

Summary of Contents for AR-FX4

















































































































































































Search results

Summary of Contents for AR-FX4

Reviews:

Related manuals for AR-FX4

Brands by name

Popular brands

Sharp AR-FX4, Operation Manual

Search results

Summary of Contents for AR-FX4

Reviews:

Related manuals for AR-FX4

Brands by name

Popular brands