SENDING A FAX
34
Se
nding
a F
a
x
(3) Press the
or
key until the name of the destination appears, and then press the OK
key.
●
You can press the # key to toggle between details on the selected destination and the
destination list. In this case, press the
or
key until the name of the destination
appears. (The search results appear in the following order: upper case letters, lower case
letters, special characters, and numbers.)
(4) Press the START key.
●
If a sub-address is stored in the selected rapid dialing or Speed Dial number, sub-
address transmission will be performed.
●
If you are using a group key, first set the transmission mode to "Memory Transmission".
(See page 32)
3
Transmission begins.
●
Your machine automatically dials and sends the fax to the receiving machine.
Notes
●
To cancel the transmission, display the transmission job and then press the CLEAR key. (See
page 37)
●
If the other machine does not respond after 45 seconds of ringing or the line is busy, your
machine will break the connection and then automatically reattempt the transmission. (See
page 29)
Sending a fax from the platen glass
1
Place the original on the platen glass. (See page 22)
●
Place the original face down. If you are sending multiple pages, place the pages one at a
time beginning from the first page.
●
Check and adjust the original size, resolution, and exposure settings as necessary.
2
Perform step 2 of "Sending a fax from the SPF" (See page 32).
ADDRESS
Johnson
Parker
Stevens
[#]:LIST⇔DETAIL
DQQMࡍࠫ㧞㧜㧜㧝ᐕ㧣㧝㧣ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧡㧢ಽ
Summary of Contents for AR-FX4
Page 12: ......
Page 108: ...ANTI JUNK FAX 104 Anti Junk Fax ...