Sharp AR-800 imager Operation Manual Download Page 90

Page: 90 / 181

13. SHEET INSERTION COPYING (Cont.)

Press the BLANK or COPIED key.

Inserting a blank special
sheet in front of the
specified page

Inserting a copied spe-
cial sheet at the speci-
fied page

BLANK

COPIED

)

→

Using the digital keys, specify the desired

page and press NEXT .

The display shows that the first sheet will be
inserted at the specified page. In the example
shown, paper from INSERT 1 will be inserted
at (or before) page 10.

To specify the next page, repeat step 5.

Up to 15 pages can be specified.

6
7

When you finish setting pages, press the

SET key.

Press the BASIC key.

Press the cassette on the display matching

the size and the direction of special sheet-

insertion paper set in the sheet-insertion

cassette.

Key in the number of copies (or sets).

Select the desired reproduction ratio,
exposure, etc. as required.

Press the START key.

Copying starts and the special insertion sheets
are automatically inserted at the specified
pages.

To return the sheet-insertion cassette to its
initial size, refer to "Resetting to the Previous
Size" on page 88.

10
11

Summary of Contents for AR-800 imager






















































































































































































Search results

Summary of Contents for AR-800 imager

Reviews:

Sharp AR-800 imager, Operation Manual, Page: 90 / 181

Search results

Summary of Contents for AR-800 imager

Reviews: