manualshive.com logo in svg

Sharp AR-800 imager, Operation Manual, Page: 27 / 181

Share
Download
Sharp AR-800 imager Operation Manual Download Page 27

23

HOW TO

MAKE

COPIES

Press the  PROGRAM  key on the display

panel.

.

The menu on the right appears.

Press the  MIXED ORIGINAL SIZES  key.

Press the  SET  key.

Select the Automatic Paper Selection (APS)

mode or Automatic Magnification Selection

(AMS) mode. Then select the desired copy

size, reproduction ratio, exposure and copy

quantity as required.

4

3

2

Copying in the Mixed Originals Mode

1

Place the originals on the original feed tray.

.

Mixed originals of Legal and Letter-R/Letter
and Ledger sized paper can be copied at the
same time.

.

After aligning the edges of the originals, set
them  face up on the original feed tray and
align the slides to the edges of the originals.

.

The number of originals you can load at a
time is 30.

Press the START key.

5

Slides

6

Summary of Contents for AR-800 imager






















































































































































































Reviews:

No comments