Sharp AR-800 imager, Operation Manual, Page: 35 / 181

31
HOW TO MAKE COPIES
Selecting the Original Size and the Copy Size
2
Press the ORIGINAL SIZE key of the same
size as the original to be copied.
1
3
Place the original(s) on the original feed
tray or on the glass.
.
After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
.
The number of originals you can load at a
time is shown below.
Letter, Letter-R, Statement-R : 60
Ledger : 30
Legal
: 35
Note: Remove any paper clips or staples from
originals before placing them on the
original feed tray.
When Using the Automatic Document Feeder
Slides
4
Press the desired COPY-SIZE key.
.
The copier calculates the correct reproduction
ratio based on the selected original size and
copy size, and displays the reproduction ratio
on the reproduction-ratio display.
.
If the desired size of paper is not in any of
the installed cassettes, the following message
appears:
Set correct cassette .
Install the correct-sized cassette or use the
sheet bypass.
Press the ZOOM ORG.
→
COPY key.