manualshive.com logo in svg

Sharp AR-800 imager, Operation Manual, Page: 28 / 181

Share
Download
Sharp AR-800 imager Operation Manual Download Page 28

24

When the power switch is turned ON, the Automatic Paper Selection (APS) mode is set as
the default mode.
In this mode, if you place an original on the original feed tray or on the glass, the copier
automatically detects the size of the original, and selects paper of the same size as the original.
This mode is available only for actual-size (100%) copying.

Check that the Automatic Paper Selection

mode is selected.

1

2

.

After aligning the edges of the originals, set
them  face up on the original feed tray and
align the slides to the edges of the originals.

.

The number of originals you can load at a
time is shown below.
Letter, Letter-R, Statement-R : 60

Ledger : 30
Legal

: 35

.

When the START key is pressed, the sensor
detects the size of the original, and selects
the paper size matched to the original.

When Using the Automatic Document Feeder

3. COPYING IN THE AUTOMATIC PAPER SELECTION MODE

Place the original(s) on the original feed

tray or on the glass.

Note: Remove any paper clips or staples from

originals before placing them on the
original feed tray.

Slides

Summary of Contents for AR-800 imager






















































































































































































Reviews:

No comments