manualshive.com logo in svg

Sharp AR-800 imager, Operation Manual, Page: 104 / 181

Share
Download
Sharp AR-800 imager Operation Manual Download Page 104

100

How to Cancel the Operation of the Weekly Timer

You can cancel the operation of the weekly timer so that the copier can be turned ON and OFF
as normal by the power switch. (Weekly timer ON/OFF settings are held in the memory even
if operation of the weekly timer is canceled.) Once canceled, operation of the weekly timer can
be restored at any time you like.

Select the timer function in the Program

menu.

.

Press the  PROGRAM   key to enter the Program
menu and then press the  WEEKLY TIMER
key.

.

The menu on the right appears.

1

Check that the  WEEKLY TIMER  key is

highlighted. Then press the  WEEKLY TIMER

key to return the display to normal. This

turns the weekly timer OFF.

2

3.  WEEKLY TIMER (Cont.)

How to Use the Copier when Turned OFF

If you want to use the copier when it is

turned off by the weekly timer, press the

START key.

.

If nothing is input for five minutes after the
copier is turned on, it will be automatically
turned off again.

Summary of Contents for AR-800 imager






















































































































































































Reviews:

No comments