manualshive.com logo in svg

Sharp AR-800 imager, Operation Manual, Page: 103 / 181

Share
Download
Sharp AR-800 imager Operation Manual Download Page 103

99

DESCRIPTION

OF THE DIGITAL

COPIER

USING THE

SPECIAL

FUNCTIONS

3.  WEEKLY TIMER

The weekly timer, which is incorporated in the copier, is a feature for turning ON and OFF the
copier automatically at the desired times specified.  If you set the weekly timer for the start
time in the morning and the end time in the evening for Sunday through Saturday, the copier
will automatically turn itself ON every morning and OFF every evening at the specified times
to meet the schedule of your office.
* To allow the weekly timer to work properly, the power switch should be always left ON.
* When the Automatic Shutoff time is set, this function is not available.

How to Set the Weekly Timer

1

Select the timer function in the Program

menu.

.

Press the  PROGRAM key to enter the
Program menu, and then press the  WEEKLY
TIMER  key.

Check the settings. If they are OK, press

the  SET  key. To change the settings, press

the  CHANGE key.

2

Set the ON/OFF times for each day of the

week.

.

Switch the day of the week by using the

 Sun and  Sat    keys.

.

Set the ON/OFF times by using the digital
keys.

.

If the settings for each day of the week are
OK, press the lower  SET  key.

.

For days for which the copier should not be
turned on, set the times as follows:

ON: 0:00
OFF: 0:00

3

Summary of Contents for AR-800 imager






















































































































































































Reviews:

No comments