manualshive.com logo in svg

Sharp AR-800 imager, Operation Manual, Page: 30 / 181

Share
Download
Sharp AR-800 imager Operation Manual Download Page 30

26

3. COPYING IN THE AUTOMATIC PAPER SELECTION MODE (Cont.)

.

If you press the ALL CLEAR key, all current copier
settings will be cleared and returned to the default
settings. For details on the default copy mode, see
page 54.

5

Press the START key.

.

Copying starts and when the required number
of copies are made, the copier automatically
stops.

.

If you do not press the START key within
about 45 seconds after having set the desired
copy modes, the functions you have selected
are automatically cleared and the copier
returns to the default copy mode.

Note: The copier may not be able to detect the

size of the following types of originals in
the APS mode:

.

Transparent originals such as OHP film

.

Originals with black areas

1

2

3

4

5

6

7

8

9

0

C

ALL CLEAR

STOP

START

CLEAR

1

2

3

4

5

6

7

8

9

0

C

ALL CLEAR

STOP

START

CLEAR

Summary of Contents for AR-800 imager






















































































































































































Reviews:

No comments