manualshive.com logo in svg

Sharp AR-800 imager, Operation Manual, Page: 88 / 181

Share
Download
Sharp AR-800 imager Operation Manual Download Page 88

84

13. SHEET INSERTION COPYING

There are two modes in sheet insertion copying which inserts special sheets of paper (e.g. colored
paper) at the specified pages of copies. In this  case, both the paper in the sheet bypass and
the cassette must be of the same size and lie in the same direction.

.

Inserting a blank special sheet in front of the specified page

.

Inserting a copied special sheet at the specified page number

To perform “sheet insertion copying”, two paper sources of the same size and orientation should
be available; one for feeding normal copy paper and the other for special “sheet insertion”
paper.
Also, the automatic document feeder must be used for this purpose.

.

Inserting a blank special sheet in front of the specified page

.

Inserting a copied special sheet at the specified page number

Examples of Sheet Insertion Copying

4

3

1

2

4

2

3

1

3

3

1

2

2

1

Blank sheet

Copied sheet

Summary of Contents for AR-800 imager






















































































































































































Reviews:

No comments