Sharp AR-800 imager, Operation Manual, Page: 176 / 181

172
1. SPECIFICATIONS
Digital Copier AR-650
Console type
Fixed (originals referenced to left center)
Indirect electrophotographic method
2-component magnetic brush developing
Heat roller
OPC
Linear CCD sensor (7500 pixels)
600 dpi x 2400 dpi with smoothing
Sheets, books and three-dimensional objects
Automatic feeding : Ledger to Statement-R
Manual feeding : Ledger to Statement-R
Up to 60 originals (Letter, 22 lbs.) can be set at a time.
Feeding speed: 65 originals/minute (Letter)
Acceptable originals:
Original size : Ledger~Statement-R
Paper weight : 16~24 lb.
About 7 minutes
65 copies per minute (Letter)
About 3.6 seconds (Letter)
Up to 999 copies (digital key entry)
Actual size : 100
±
0.5%
Original size : LD, COMP, LG, LT, ST
Paper size : LD, COMP, LG, LT, ST
25 to 400% (in 1% increments)
* Independent scaling possible in the adjustment mode.
Cassette : 500 sheets (55 mm or less)
Sheet bypass : 100 sheets (11 mm or less)
Large-capacity feeder: 4,000 sheets
Magnetic auto-toner system
Automatic plus manual selection from 11 exposure steps
Halogen lamp
115V, 60 Hz, 16A
2.0 kW max.
36.2” (W) x 29.2” (D) x 43.7” (H)
Approx. 551.9 lbs.
Max. 480 sheets (Letter)
Model Name
Type
Original Glass
Copying System
Developing System
Fixing System
Photosensor Type
Original Scanning System
Resolution
Acceptable Originals
Acceptable Copy Paper Size
Reversing Automatic
Document Feeder
Warm-up Time
Copying Speed
First Copy Time
Multiple Copying
Reproduction Ratio
Paper Supply
Toner Density Adjustment
Exposure Control
Light Source
Power Requirements
Power Consumption
Dimensions
Weight
Storage Capacity
* Specifications and appearance are subject to change without notice in the interest of product
improvement.