manualshive.com logo in svg

Sharp AR-800 imager, Operation Manual, Page: 14 / 181

Share
Download
Sharp AR-800 imager Operation Manual Download Page 14

10

3.  DESCRIPTION OF THE CONTROL PANEL

���

Clip tray
Put any paper clips re-
moved from the originals
here.

���

INTERRUPT key
When you want to make
a copy of a different ori-
ginal during a multicopy
run, press this key. During
interrupt-copying, you
can make copies only one
at a time. To return to the
previous multicopying
run, press this key again.

���

ENERGY SAVER key
When you are not using
the copier for a fairly long
period of time, press this
key. The copier enters the
energy-saving mode, and
all display lamps go out.
To resume copying, press
this key again. After a
short while, the copier
becomes ready for
copying.

���

TOTAL COUNTER
Displays the total number
of copies made after the
copier was installed.

���

PRINTER/NETWORK key
If you have an optional
printer installed, press
this key to access the
printer function.

���

COPY key
If you have an optional
printer installed, press
this key to select the copy
function.

���

��� ���

���

��� ���

HELP

ENERGY SAVER

TIMER

INTERRUPT

COPY

PRINTER/NETWORK

���

Summary of Contents for AR-800 imager






















































































































































































Reviews:

No comments