manualshive.com logo in svg

Sharp AR-800 imager, Operation Manual, Page: 25 / 181

Share
Download
Sharp AR-800 imager Operation Manual Download Page 25

21

HOW TO

MAKE

COPIES

Tip: If you want to set more originals than the

maximum number which can be set on the
original feed tray at one time, you may add
originals up to 3 times at the maximum.
Press the  CONTINUE  key during the
scanning. After scanning the loaded
originals, place the next set of originals.
Set the last pages of the originals first.

Copying in the Single-Feed Mode

Press the PROGRAM key on the display

panel.

.

The menu on the right appears.

1

2

Press the  ADF  key.

Press the  SADF  key on the panel to select

single feeding.

.

The  SADF  key is highlighted and selected.

.

The display panel returns to the original
display.

Select the desired copy size, reproduction

ratio, exposure and copy quantity.

.

The automatic paper selection mode is set
as the default mode.

3

4

Summary of Contents for AR-800 imager






















































































































































































Reviews:

No comments