Sharp AQUOS LX959H Operation Manual Download Page 97

Page: 97 / 100

Display reports regarding failures and changes for timer

settings.

You can check the current version of the software on the

screen.

Information on the software license

for this product

Appendix

Updating your TV via USB/Network

Go to “Menu”

“Setup”

“Information”

“Software update”

“USB update”.

• Also can transform to the latest software

via network. Go to

“Menu”

“Setup”

“Information”

“Software update”

“Network update”, and follow the on-screen

instructions.

•

A broadband connection and network setup

are required to update the software using

the internet. (see page 75-76)

The TV displays the

software

version information

after checking the data.

Press

to select “Yes” to update the

system, and then press

The TV restarts automatically, and the

software

updating will be completed.

• This operation may take a while.

Insert the USB device containing the system

data file and then press

The TV displays a confirmation screen while

checking the data in the inserted USB device.

This function allows you to transform to the latest

software via a USB device.

Go to “Menu”

“Setup”

“Information”

“Software

licence”.You can read the software licences in this

menu.

CAUTION

• Be sure to insert the USB device correctly into the terminal.

CAUTION

• If the software is not compatible with the system, an error

message appears on the screen. Repeat step 2 after

pressing

• When an error message displays, check to see if:

• The USB device is inserted firmly.

• The USB memory has two or more software files.

• No software for updating the system exists in the USB

memory.

• The software file is broken.

• The software file is not compatible with your TV’s

software.

• The current software is same as the updated software.

• The USB device is not formated by FAT32 .

CAUTION

• Version up may take several time according to network

speed. Please do not turn off TV or execute other

operations during version up.

USB 1

AUDIO(R/L)

OUTPUT

USB 2

Receiver report

Message list

When a new broadcast station is detected, the message is

updated in the “Message list” of the “Information” menu.

Identification

NOTE

• If there are unread messages in the “Message list”, “New

information” is displayed on “Channel display”. (See page 25.)

Summary of Contents for AQUOS LX959H





































































































Search results

Summary of Contents for AQUOS LX959H

Reviews:

Related manuals for AQUOS LX959H

Brands by name

Popular brands

Sharp AQUOS LX959H, Operation Manual

Search results

Summary of Contents for AQUOS LX959H

Reviews:

Related manuals for AQUOS LX959H

Brands by name

Popular brands