Sharp AQUOS LX959H Operation Manual Download Page 84

Page: 84 / 100

Other useful features

Multimedia/Home network

Select “Multimedia” or “Home network” from

INPUT list screen.

Press

Mutilmedia

Press

to select “Media selection”, and

then press

• The available selections are “Media selection”

and “Folder display setting”.

Press

to select the Multimedia

device where you want to find your files, and

then press

• You can select from “All” or “Folder” for the

type of folder directory in “Folder display

setting”.

Example

USB 1

USB 2

• If the TV is turned off and then on again, the

number assigned to the device may change.

Home network

Press

to select the Home network server

where you want to find your files, and then

press

• Press

to search for servers.

Example

Server1

Server2

Press

to select “Photo mode”, “Music

mode” or “Video mode”, and then press

Example

Photo mode

Vid

mode

Music mode

Press

to select the desired folder, and

then press

NOTE

• You cannot switch the input mode if a device is not connected.

• You do not need to select the drive/server in step 2 when

there is only one drive in the connected device or there is

only one home network server connected to the TV.

• You cannot enter these modes when there is no server

connected to the TV in home network mode.

• The key guide display disappears automatically after a few

seconds. To display the key guide display again, press

DISPLAY

You can connect the TV to a USB memory device,

USB hard disk drive (HDD), SD/SDHC memory card

or home network server to enjoy viewing pictures,

listening to music, and watching videos.

The USB

memory device can also be used for recording.

NOTE

• Depending on the USB memory device/USB hard disk

drive (HDD)/SD/SDHC card/home network server, the TV

may not be able to recognise the recorded data.

• It may take time to read the recorded data if the USB

memory device/USB hard disk drive (HDD)/SD/SDHC card/

home network server contains many files or folders.

• Use only alphanumeric characters for naming files.

• File names over 80 characters (may vary depending on

character set) may not be displayed.

• External subtitles for some video files may not be

supported.

• Partitioned USB hard disk drives are not supported.

Therefore, use only USB hard disk drives that are not

partitioned.

• Only compatible file formats are displayed.

• To play back data on a USB memory device or SD/SDHC

card, insert the device on the TV. Select “Multimedia” from

“INPUT”.

• Use the following procedure to switch back to Multimedia

after switching from Multimedia to another mode.

• The corresponding file format is different between

“Multimedia” and “Home network”.

EXT MEDIA

INFO

GUIDE

SLEEP

EXT MEDIA

INFO

GUIDE

SLEEP

EXT MEDIA

INFO

GUIDE

SLEEP

EXT MEDIA

INFO

GUIDE

SLEEP

Summary of Contents for AQUOS LX959H





































































































Search results

Summary of Contents for AQUOS LX959H

Reviews:

Related manuals for AQUOS LX959H

Brands by name

Popular brands

Sharp AQUOS LX959H, Operation Manual

Search results

Summary of Contents for AQUOS LX959H

Reviews:

Related manuals for AQUOS LX959H

Brands by name

Popular brands