Sharp AQUOS LX959H Operation Manual Download Page 58

Page: 58 / 100

Enjoying 3D image

Watching 2D images in 3D

You can convert normal 2D images into 3D images.

Press

to select “2D

3D”, and then

press

Turn on the power of the 3D glasses, and then

wear the 3D glasses.

NOTE

• The confirmation message to select either 3D or 2D mode

is displayed on the screen once per hour.

• When the TV converts normal 2D images into 3D images,

you can display the “2D

3D convert effect” menu to

adjust the convert effect by pressing

Switching to the previous mode

You can switch back to the previous mode by pressing

Press

• A confirmation message is displayed.

Select “Yes”, and then press

• The TV returns to the previous mode.

3D menu

Pressing

in 3D mode displays the 3D menu. Press

the coloured buttons to make the necessary settings.

Buttons

Description

button

3D convert effect. (See page 59. )

• “2D

3D convert effect” is available

only when selecting “2D

3D”. (refer

Watching 2D images in 3D

shown

above.)

button

3D brightness boost. (See this page.)

button

3D surround. (See page 47.)

• The surround mode changes each time

you press

B button

3D setup. (See page 59.)

NOTE

• The keys are available only before the 3D menu disappears.

EXT MEDIA

INFO

GUIDE

SLEEP

EXT MEDIA

INFO

GUIDE

SLEEP

EXT MEDIA

INFO

GUIDE

SLEEP

EXT MEDIA

INFO

GUIDE

SLEEP

Configuring the TV settings to

enhance 3D image viewing

You can make various settings to enhance 3D image

viewing.

3D picture adjustments

Basic operation

Go to “Menu”

“Setup”

“Picture”

select/

adjust the item you want to set.

NOTE

• Which items can be selected/adjusted differs depending on

whether the TV is in 2D mode or in 3D mode.

AV mode

The audio and video settings can be changed to suit

the programme or input content being watched.

Selected item

Description

STANDARD (3D)

For a highly defined image in a

normally bright room.

GAME (3D)

Lowers image brightness for easier

viewing.

NOTE

• You can select “AV mode” by pressing

AV mode

on the

remote control unit.

3D brightness boost

You can adjust the backlight of the TV for 3D image

viewing.

Selected item

Description

High

The screen brightens

Middle

Low

The screen dims

NOTE

• When “High” or “Low” is selected, “OPC”, “Backlight” and

“Range of OPC” are not available.

• The “3D brightness boost” is not available for 2D mode.

• The “3D brightness boost” items can be saved for every 3D

“AV mode” item (“STANDARD (3D)” and “GAME (3D)”.)

EXT MEDIA

INFO

GUIDE

SLEEP

EXT MEDIA

INFO

GUIDE

SLEEP

EXT MEDIA

INFO

GUIDE

SLEEP

EXT MEDIA

INFO

GUIDE

SLEEP

Summary of Contents for AQUOS LX959H





































































































Search results

Summary of Contents for AQUOS LX959H

Reviews:

Related manuals for AQUOS LX959H

Brands by name

Popular brands

Sharp AQUOS LX959H, Operation Manual

Search results

Summary of Contents for AQUOS LX959H

Reviews:

Related manuals for AQUOS LX959H

Brands by name

Popular brands