Sharp AQUOS LX959H Operation Manual Download Page 55

Page: 55 / 100

Enjoying 3D image

Preparing for the 3D glasses

Confirm how to use the 3D glasses before watching 3D-supported images. These 3D glasses are only for use with

SHARP LCD TVs supporting 3D.

You can enjoy 3D-supported images on the TV when you wear the supplied 3D glasses or optional 3D glasses.

NOTE

• Some menu items are greyed out in 3D mode. This is not a malfunction.

Parts name

NOTE

• Do not soil or apply stickers or other obstacles to the infrared receiver. Doing so may block signals from the TV and prevent

the 3D glasses from working properly.

• Interference from other infrared communications equipment may prevent you from viewing 3D images correctly.

• Before using the 3D Glasses for the first time, remove the insulating sheet attached to them.

Infrared receiver

• The illustration above is for reference. They may be slightly different from the actual accessories.

• CR2025 button battery have been installed in the 3D glasses.

3D Glasses (×2)

Button Battery CR2025 (×2)

Accessories for supplied 3D Glasses

Please make sure that the following accessories are along with 3D glasses.

Indicator/Power button

Battery holder

Nose pad

NOTE

Summary of Contents for AQUOS LX959H





































































































Search results

Summary of Contents for AQUOS LX959H

Reviews:

Related manuals for AQUOS LX959H

Brands by name

Popular brands

Sharp AQUOS LX959H, Operation Manual

Search results

Summary of Contents for AQUOS LX959H

Reviews:

Related manuals for AQUOS LX959H

Brands by name

Popular brands