60
To watch an HDMI equipment image, select
“HDMI 1”, “HDMI 2”, “HDMI 3
(ARC)
” or “HDMI
4” using
b
(INPUT SOURCE)
on the
remote control unit or
INPUT
on the TV.
1
Press
MENU
and the MENU screen displays.
2
Press
b
/
c
/
d
to select “Option”.
3
Press
a
/
b
to select “HDMI auto view”, and
then press
?
.
• The HDMI auto view can be selected only when
“HDMI 1”, “HDMI 2”, “HDMI 3(ARC)” or “HDMI 4”
is selected.
5
Setup
CH list
Menu
:Back
:Enter
Input label
Input skip
Digital audio output
Τerminal setting
Option
[ ]
HDMI auto view
Allow HDMI view mode to change
[Enable]
w
HDMI (High-Definition Multimedia
Interface) Auto View
Press
a
/
b
to select the desired item, and
then press
?
.
6
NOTE
• Refer to your external equipment operation manual for the
above settings.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
Co
nnecting an HDMI output device
Settings when using external devices
HDMI terminals can carry audio and visual signals to the TV with an HDMI certified cable. When you want to output
the audio and picture from an HDMI output device on the TV, select “HDMI 1”, “HDMI 2”, “HDMI 3(ARC)” or “HDMI
4” by switching the input source.
HDMI output device
Selected item
Description
Enable/Disable
Set whether or not to use “Wide
mode” based on signal recognition,
including an HDMI signal.
Settings when using HDMI output devices
HDMI cable
(commercially
available)
Press
a
/
b
to select “Terminal setting”, and
then press
?
.
4
(DC 5V 900mA)
ARC
