manualshive.com logo in svg

Sharp AL-2020, Service Manual

Introducing the Sharp AL-2020, a versatile multifunction printer designed for efficient productivity. Enhance your printing experience with the comprehensive Service Manual, providing detailed instructions for optimum performance. Download this invaluable manual for free from manualshive.com, unlocking the full potential of your Sharp AL-2020 with ease and precision.

Share
Download
background image

6. Manual paper feed section . . . . . . . . . . . . . . . . . . . . . 8-14

A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14

B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . 8-14

C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . 8-16
D. Pressure plate holder attachment  . . . . . . . . . . . . . 8-16

7. Rear frame section . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16

A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16

B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . 8-16
C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . 8-18

8

Power section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18

A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18

B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . 8-18
C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . 8-18

9. Duplex motor section  . . . . . . . . . . . . . . . . . . . . . . . . . 8-18

A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18

B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . 8-18

C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . 8-18

10. Reverse roller section . . . . . . . . . . . . . . . . . . . . . . . . . 8-19

A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19

B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . 8-19

C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . 8-19

11. RSPF section (AL-2050/2060)  . . . . . . . . . . . . . . . . . . 8-19

A. Front cabinet, rear cabinet . . . . . . . . . . . . . . . . . . . 8-19

B. Upper door unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19

C. Document tray unit . . . . . . . . . . . . . . . . . . . . . . . . . 8-20
D. Upper door open/close sensor . . . . . . . . . . . . . . . . 8-20

E. Reverse clutch, paper exit roller. . . . . . . . . . . . . . . 8-20

F. Drive unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20
G. Shutter solenoid . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-21

H. Pickup roller, take-up roller. . . . . . . . . . . . . . . . . . . 8-22

I. Paper empty sensor . . . . . . . . . . . . . . . . . . . . . . . . 8-22
J. PS roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-23

K. Upper transport roller . . . . . . . . . . . . . . . . . . . . . . . 8-23

L. Paper sensor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24
M. Lower transport roller . . . . . . . . . . . . . . . . . . . . . . . 8-24

N. Paper exit sensor . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24

12. SPF section (AL-2035/2040)  . . . . . . . . . . . . . . . . . . . 8-25

A. SPF motor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25
B. Pick-up roller, paper feed roller  . . . . . . . . . . . . . . . 8-26

C. Paper exit roller  . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26

D. Set sensor, scan front sensor. . . . . . . . . . . . . . . . . 8-27
E. Transport roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-27

[9]

ADJUSTMENTS

1. Optical section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

A. Copy magnification ratio adjustment  . . . . . . . . . . . . 9-1
B. Image position adjustment . . . . . . . . . . . . . . . . . . . . 9-2

2. Copy density adjustment  . . . . . . . . . . . . . . . . . . . . . . . 9-4

A. Copy density adjustment timing . . . . . . . . . . . . . . . . 9-4

B. Note for copy density adjustment . . . . . . . . . . . . . . . 9-4
C. Necessary tool for copy density adjustment . . . . . . . 9-4

D. Features of copy density adjustment . . . . . . . . . . . . 9-4

E. Copy density adjustment procedure. . . . . . . . . . . . . 9-5

3. High voltage adjustment . . . . . . . . . . . . . . . . . . . . . . . . 9-5

A. Main charger (Grid bias). . . . . . . . . . . . . . . . . . . . . . 9-5

B. DV bias check  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6

4. Duplex adjustment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6

A. Adjusting the paper reverse position 

in memory for duplex copying  . . . . . . . . . . . . . . . . . 9-6

B. Adjusting trailing edge void 

in duplex copy mode  . . . . . . . . . . . . . . . . . . . . . . . . 9-6

5. SPF/RSPF scan position automatic adjustment . . . . . . 9-7

6. SPF/RSPF mode sub scanning direction magnification 

ratio adjustment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8

7. Automatic black level correction . . . . . . . . . . . . . . . . . . 9-8

[10] SIMULATION, TROUBLE CODES

1.

Entering the simulation mode . . . . . . . . . . . . . . . . . . . 10-1

2.

Key rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

3.

List of simulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

4.

Descriptions of various simulations. . . . . . . . . . . . . . . 10-2

5.

Trouble codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-40
A. Trouble codes list . . . . . . . . . . . . . . . . . . . . . . . . . 10-40

B. Details of trouble codes  . . . . . . . . . . . . . . . . . . . . 10-40

6.

FAX communication error codes (AL-2060 only)  . . . 10-43

A. Error code identification . . . . . . . . . . . . . . . . . . . . 10-43

[11] USER PROGRAM

1.

Functions that can be set with user programs  . . . . . . 11-1

2.

Toner save mode (AL-2020/2035/2040) . . . . . . . . . . . 11-1

3.

User programs (AL-2020/2035/2040) . . . . . . . . . . . . . 11-1

4.

User programs (AL-2050/2060)  . . . . . . . . . . . . . . . . . 11-2
A. Copy mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2

B. Print mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4

[12] FAX SOFT SWITCH

1.

FAX soft switch setting change quick reference 
table  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1

2.

Soft switch list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2

3.

Soft switch descriptions  . . . . . . . . . . . . . . . . . . . . . . 12-22

[13] ELECTRICAL SECTION

1.

Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
A. Overall block diagram. . . . . . . . . . . . . . . . . . . . . . . 13-1

2.

Actual wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . 13-3

A. MCU PWB (AL-2020/2035/2040) . . . . . . . . . . . . . . 13-3

B. MCU PWB (AL-2050/2060)  . . . . . . . . . . . . . . . . . . 13-4
C. SPF unit (AL-2035/2040) . . . . . . . . . . . . . . . . . . . . 13-5

D. RSPF unit (AL-2050/2060) . . . . . . . . . . . . . . . . . . . 13-5

E. NIC PWB (AL-2040/2050/2060) . . . . . . . . . . . . . . . 13-5

3.

Signal name list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-6

[14] CIRCUIT DIAGRAM

1.

MCU PWB (AL-2020/2035/2040) . . . . . . . . . . . . . . . . 14-1

2.

OPE PWB (AL-2020/2035/2040)  . . . . . . . . . . . . . . . 14-13

3.

MCU PWB (AL-2050/2060). . . . . . . . . . . . . . . . . . . . 14-14

4.

OPERATION PWB (AL-2050/2060) . . . . . . . . . . . . . 14-30

5.

FAX MAIN PWB (AL-2060) . . . . . . . . . . . . . . . . . . . . 14-33

6.

FAX OPERATION PWB (AL-2060). . . . . . . . . . . . . . 14-39

Summary of Contents for AL-2020





























































































































































































































Reviews:

No comments

Related manuals for AL-2020

Samsung ML-6050 Manual Del Usuario preview
ML-6050
Brand: Samsung Pages: 82
Samsung ML-2525 Datasheet preview
ML-2525
Brand: Samsung Pages: 2
Xante CL30 Setup Manual preview
CL30
Brand: Xante Pages: 25
Xerox DocuPrint C525 A Quick Reference Manual preview
DocuPrint C525 A
Brand: Xerox Pages: 49
Xerox DocuPrint C2100 Quick Reference Manual preview
DocuPrint C2100
Brand: Xerox Pages: 206
Xerox DocuPrint 96 Installation Planning Manual preview
DocuPrint 96
Brand: Xerox Pages: 116
Xerox DocuPrint 96 Message Manual preview
DocuPrint 96
Brand: Xerox Pages: 358
Xerox DocuPrint 4635 Operator'S Manual preview
DocuPrint 4635
Brand: Xerox Pages: 344
Xerox DocuPrint 205 Operation Manual preview
DocuPrint 205
Brand: Xerox Pages: 59
Xerox DocuPrint 900 Product Safety Data Sheet preview
DocuPrint 900
Brand: Xerox Pages: 2
Xerox C230 Quick Reference Manual preview
C230
Brand: Xerox Pages: 10
Xerox DocuPrint 180 Maintenance Manual preview
DocuPrint 180
Brand: Xerox Pages: 51
Xerox DocuPrint 180 Solution Manual preview
DocuPrint 180
Brand: Xerox Pages: 110
Xerox 7300DX - Phaser Color Laser Printer Overview preview
7300DX - Phaser Color Laser Printer
Brand: Xerox Pages: 8
Xerox 8400B - Phaser Color Solid Ink Printer Reference Manual preview
8400B - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 203
Xerox 3150 - Phaser B/W Laser Printer Product Data Sheet preview
3150 - Phaser B/W Laser Printer
Brand: Xerox Pages: 2
Xerox 3117 - Phaser B/W Laser Printer Upgrade Instructions preview
3117 - Phaser B/W Laser Printer
Brand: Xerox Pages: 8
Xerox C8 - DocuPrint Color Inkjet Printer System Administration Manual preview
C8 - DocuPrint Color Inkjet Printer
Brand: Xerox Pages: 148

Brands by name

Popular brands

Load more brands