Sharp AL-2020 Service Manual Download Page 220

Page: 220 / 220

COPYRIGHT

2008 BY SHARP CORPORATION

Printed in Japan.

No part of this publication may be reproduced,

stored in a retrieval system, or transmitted,

in any form or by any means,

electronic; mechanical; photocopying; recording or otherwise

without prior written permission of the publisher.

Trademark acknowledgements

• Microsoft

, Windows

98, Windows

Me, Windows

2000,

Windows

XP, Windows

Vista and Internet Explorer

are registered trademarks

or trademarks of Microsoft Corporation in the U.S.A. and other countries.

• Adobe

, the Adobe

logo, Acrobat

, the Adobe

PDF logo, and Reader

are

registered trademarks or trademarks of Adobe Systems Incorporated in the United
States and other countries.

• IBM, PC/AT, and PowerPC are trademarks of International Business Machines

Corporation.

• Sharpdesk is a trademark of Sharp Corporation.

• All other trademarks and copyrights are the property of their respective owners.

SHARP CORPORATION

Digital Document System Group
CS Promotion Center
Yamatokoriyama, Nara 639-1186, Japan

2008 April Printed in Japan

Summary of Contents for AL-2020





























































































































































































































Search results

Summary of Contents for AL-2020

Reviews:

Related manuals for AL-2020

Brands by name

Popular brands

Sharp AL-2020, Service Manual

Search results

Summary of Contents for AL-2020

Reviews:

Related manuals for AL-2020

Brands by name

Popular brands