GB
appendice
page
15
I
D
F
E
6 - Light chase control section
Studio consoles have a section dedicated to chases that are among the sim-
plest, but at the same time the most powerful and flexible on the market.
This zone, dedicated to automated operations, is recognisable by its dark
grey buttons and knobs and light blue printing.
Studio 12 Scan Control has 12 chases, each with 12 program steps.
The chase section has two operating modes: REG and DIRECT.
REG mode allows to assign a chase to a memory register and adjust output
level, RATE and SLOPE of a chase being assigned or already assigned to a
register.
DIRECT mode allows a chase to be sent directly to the GRAND MASTER
and then out, regulating its level, RATE and SLOPE. Chases can only be
created or modified in DIRECT mode.
The
button is used to select one of the 12 available chases. Press
the button and hold it down: the buttons of the channels in the MANUAL
PRESETS correspond to the chases. If a chase is enabled, the button’s LED is lit. If no chases are
enabled, all the LEDs are off.
The
function is used to select the required steps among those making up a chase. When
assigning a chase to a memory register, it’s also possible to assign it to several registers, chan-
ging the level, rate, slope and steps to be used in each case. There’s therefore an almost endless
number of possible variations.
To select the steps, press
: and hold it down: the button’s LED lights up and the buttons of
the channels in the MANUAL PRESETS correspond to the steps. The lit LEDs indicate the enabled
steps.
The
function allows to run the chases in sync with music. For the purpose, Studio 12 con-
soles are fitted with a built-in microphone and an audio input which automatically excludes the
microphone.
When working in MUSIC mode, only SLOPE regulation remains enabled: the music rhythm repla-
ces RATE.
m u s i c
s t e p
s t e p
c h a s e
9
8
7
6
5
4
3
2
1
1 0
0
re g
c h a s e
d i re c t
m u s i c
s t e p
e d i t
ra t e
s l o p e
light chase controls
1
2
3
4 5 6
7
8
9
10
m i n
m a x
0
1
2
3
4 5 6
7
8
9
10
m i n
m a x
0
