GB
appendice
page
33
I
D
F
E
132. This value will be entered in a table and can be easily reached using the controls as already
explained. The use of the tables requires a more memory when adding new units to the library
(see parag. 8.4).
The following menu appears:
. Press the right-hand arrow
to access setting and the left-hand one to exit the function.
Once OK (right-hand SCROLL) has been pressed, the effect string created in 8.5.1.2 will reappear:
the following menu appears:
. Use the CURSOR up/down
arrows to set the value, left/right to pass from effect to effect, press the right-hand SCROLL to go
to page 2 and the left-hand SCROLL to return to the previous menu.
In this case:
and then
.
These settings therefore indicate that tabular control will only be used for the gobo channel.
To set the tables’ parameter, press the dark grey button below where GOBOS is printed. The fol-
lowing will appear on the display:
.
“Tot. Item” are intended as the number of parameters to enter in the table (maximum 50). Press
the right-hand CURSOR button to decide which ITEM to change and then what VALUE to enter for
that index.
Continuing with the example of the Victory II 250, the following appears:
PAGE_1 TOT. ITEM ITEM VALUE
EFFECT_1 [13] 6 105 ok->
PAGE_1 TOT. ITEM ITEM VALUE
EFFECT_1 [13] 5 85 ok->
PAGE_1 TOT. ITEM ITEM VALUE
EFFECT_1 [13] 4 65 ok->
PAGE_1 TOT. ITEM ITEM VALUE
EFFECT_1 [13] 3 45 ok->
PAGE_1 TOT. ITEM ITEM VALUE
EFFECT_1 [13] 2 25 ok->
PAGE_1 TOT. ITEM ITEM VALUE
EFFECT_1 [13] 1 0 ok->
PAGE_1 TOT. ITEM ITEM VALUE
EFFECT_1 [ 1] 1 0 ok->
PRISM ----------------------------- <->
[LIN] --- --- --- --- --- P2
DIMMR COLOR PALET GOBOS ROT.G SHUTR <->
[LIN] LIN LIN TAB LIN LIN P1
DIMMR COLOR PALET GOBOS ROT.G SHUTR <->
[LIN] LIN LIN LIN LIN LIN P1
Select feature to configure for esc<-
VICTORY TST --[CONTROL TYPE ] ok->
