page
12
4.2.1 - Go function
In this operating mode, the GO function and the
are not enabled.
4.2.2 - Solo function
The manual zone also includes the
function. When this is enabled (the relative LED is lit),
the subtractive flash function is enabled. This means that by pressing one or more of the 12 flash
buttons, all the channels are switched off, apart from those on which Flash is being used. As
already seen, if channels 13 - 24 have to be flashed, the banks of buttons have to be switched
over using the
buttons.
4.2.3 - Link function
The
function allows to select one or more channels and unlatch them from the control of
MASTERs A and B. In this mode, the output level depends on the position of the channel fader
and (obviously) the GRAND MASTER level.
Any variation in the level of a channel which is part of a stored scene can be transferred to the
memory without reconstructing the entire scene. This option is also possible thanks to the LINK
function (see chapter 5 - Memory registers).
l i n k
A
o r
p s e t
B
g o
s o l o
s
e
c
o
n
d
s
m
i
n
u
t
e
s
1
2
4
8 16 32
1
2
4
8
manual presets cross time
of f
m a x
0
