9
140
System Manual – MOVITRAC® 07
Integrated operating panel
Startup
9.3
Integrated operating panel
Operation
The following basic principle applies: Press the
key once to start editing. Double-
click the
key to exit edit mode.
Functions of the
operating panel
The UP, DOWN and IN/OUT buttons are used for navigating through the menus. The
RUN and STOP/RESET buttons are used for controlling the drive. The setpoint potenti-
ometer is used for selecting setpoints.
"UP" for scrolling through the symbols and editing parameters.
"IN/OUT" for activating and deactivating the symbols or parameter menus
"DOWN" for scrolling through the symbols and editing parameters.
You can start the drive with "RUN".
"STOP/RESET" is used for resetting faults and for stopping the drive.
RUN
STOP
RESET
Stopping the drive with the STOP/RESET key is not a safety function. Switching the
power off unlocks the inverter again and you can enable the inverter.
0
0
I
