Servomex SERVOPRO Plasma, Operator'S Manual

Page: 55 / 82

Plasma Gas Analyzer
53 02001001A_9
7 SPARES
WARNING
Do not use spares other than those specified below, and do not
attempt to carry out any maintenance procedures other than those
specified in this manual. If you do, you can damage the analyzer and
invalidate any warranty.
The standard spares available for the analyzer are shown below. You can order these
spares from Servomex or your Servomex agent.
Spare Part Number
Spare fuse (kit) S2001FUSE
Plasma spares kit S2001999
Spare power supply assembly S2001953
8 STORAGE AND DISPOSAL
8.1 Storage
Refit any protective plastic covers (see Section 2.6) and place the analyzer and any
associated equipment in its original packaging before storage. Alternatively, seal it
inside a waterproof plastic bag, sack, or storage box.
Store the analyzer and any associated equipment in a clean, dry area. Do not subject it
to excessively hot, cold, or humid conditions: see Section 2.2.
8.2 Disposal
Dispose of the analyzer and any associated equipment safely, and in accordance with
all of your local and national safety and environmental requirements.

The analyzer is not suitable for disposal in municipal waste streams (such as
landfill sites, domestic recycling centres and so on). Refer to next section for
disposal requirements in accordance with the WEEE Directive within the EC.

If you send the analyzer to Servomex or your local Servomex agent for
disposal, it must be accompanied by a correctly completed decontamination
certificate.