Servomex NanoTrace DF-760E, Instruction Manual

Page: 68 / 182

64 DF-760E User Interface
to trip if the pressure exceeds preset limits. The user may assign the pressure alarm to one
of four relays.
Figure 44: Moisture Pressure Range Alarm Setup
The limits are not user adjustable but are set automatically on the basis of the background
gases entered in the GSF screen. See page 103 for additional information on setting the
background gases.
Use the Next key to move from between fields and use the arrow keys ( and

to
change the highlighted selections and to enter numerical values. When done, use the Next
key to move to the Accept button and hit the Enter key to return to the main display.
Using the
ESC
key at anytime will exit the screen making no changes and return to the
main display.
7.5.6.4 Moisture System Alarm Setup
Figure 45: Moisture System Alarm Setup
If left for more than 30 minutes, a System Error Code will trip a System Alarm if
configured to do so. See page 60 for additional information on System Error Codes.
NOTE: The 30 minute clock is delayed for 60 minutes on a “cold” system start up.