Server Technology Switched Rack PDU Page 75 Installation And Operation Manual Download | Manualshive

Page: 75 / 157

background image

Switched PDU
Installation and Operations Manual

Operations



75

System Administration

Creating a pre-login banner:

The Set Banner command specifies text that appears prior to the login authentication. This feature allows
administrators to configure a message up to 2069 characters for display of legal, disclaimer or other text as required
by application. If left blank, the user will be taken directly to the login prompt.

NOTES:

For SSH sessions only:



The “keyboard-interactive” authentication method must be used for the banner to display.



Banner length is truncated to 1500 bytes in SSH packets to avoid failure of SSH connection when configured with a long login banner.

To create a pre-login banner:

At the Switched CDU: prompt, type

set banner

and press

Enter

. Type the desired pre-login banner text and when

finished type

Ctrl-z

.

Creating a location description:

The Set Location command specifies text that appears in the Location field of the Web screen. The text is also
appended to a Welcome to banner that appears when a user successfully logs in serially or through a Telnet session.

If you do not issue this command, or if you issue this command without specifying any text, the control screen’s
Location field will be blank and no Welcome to banner will be displayed.

To create a location description:

At the Switched CDU: prompt, type

set location

followed by a descriptive name of up to 24 alphanumeric and other

typed characters - (ASCII 33 to 126 decimal) are allowed; spaces are allowed. Press

Enter

.

Omitting any characters after typing ‘set location’ deletes any previously specified text.

Examples

The following command specifies Florida HQ as the descriptive location for the control screen and the login banner:

Switched CDU: set location Florida HQ<Enter>

The following command deletes any previously specified location description:

Switched CDU: set location<Enter>

In this case, the control screen’s Location field will be blank, and no welcome banner will be displayed after a
successful login.

Setting the system area:

The Set System Area command is used to set the total area for the system. This value is used for total system power
calculations.

To set the system area:

At the Switched CDU: prompt, type

set system area

, followed by the system area (in square feet) and press

Enter

.

Example

The following command sets the total system area to 6.3 square feet:

Switched CDU: set system area 6.3<Enter>

Setting the system area unit of measure:

The Set System Area Unit command sets the value for the system area footprint in either square meters or square feet.

The default unit of area is a square meter.

To set the system area unit of measure:

At the Switched CDU: prompt, type

set system areaunit

, followed by

squaremeter

or

squarefoot,

and press

Enter

.

«
...
73
74
75
76
77
...
»

Summary of Contents for Switched Rack PDU






























































































































































Reviews:

No comments

Related manuals for Switched Rack PDU

ROBO Glove RG-2

Brand: TOWA Pages: 3

Brand: Atlas Pages: 8

Brand: XODO Pages: 16

Brand: Vertiv Pages: 29

Brand: EuroLite Pages: 13

Brand: Noark Pages: 4

Brand: Unipower Pages: 14

Brand: TSL Pages: 29

Brand: RCI Pages: 4

Brand: Nibe Pages: 28

RackLink RLNK-1015V

Brand: Middle Atlantic Products Pages: 8

Brand: Middle Atlantic Products Pages: 12

PD-DC-200 Series

Brand: Middle Atlantic Products Pages: 14

Premium+ RackLink RLNK-P415

Brand: Middle Atlantic Products Pages: 214

Brand: GMG Power Pages: 15

Brand: CTR Electronics Pages: 21

Brand: socomec Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands