Server Technology Switched Rack PDU, Installation And Operation Manual

Page: 71 / 157

Switched PDU
Installation and Operations Manual
Operations

71
Adding an outlet to a group:
The Add OutletToGroup command adds an outlet to a group. To add more than one outlet, but not all outlets, you
must use multiple Add OutletToGroup commands.
To add an outlet to a group:
At the Switched CDU: prompt, type add outlettogroup , optionally followed by an outlet name and group name.
Press Enter , or
Type add OutletToGroup , followed by all and the group name. Press Enter .
Examples
The following commands uses absolute outlet names to add outlets A1 and A2 to group name ServerGroup_1:
Switched CDU:add OutletToGroup .a1 ServerGroup_1<Enter>
Switched CDU:add OutletToGroup .a2 ServerGroup_1<Enter>
The following commands use the outlets’ descriptive names to add outlets DataServer_1 and WebServer_1 to group name
ServerGroup_1:
Switched CDU:add OutletToGroup DataServer_1 ServerGroup_1<Enter>
Switched CDU:add OutletToGroup WebServer_1 ServerGroup_1<Enter>
The following command add all outlets to group name ServerGroup_1:
Switched CDU: add OutletToGroup<Enter>
Outletname: all<Enter>
Groupname: ServerGroup_1<Enter>
Deleting an outlet from a group:
The Delete OutletFromGroup command deletes an outlet from a group. To delete more than one outlet, but not all
outlets, you must use multiple Delete OutletToGroup commands.
To delete an outlet from a group:
At the Switched CDU: prompt, type delete outletfromgroup , optionally followed by an outlet name and a group
name. Press Enter , or
Type delete outletfromgroup , followed by all then the group name. Press Enter .