Server Technology Switched Rack PDU Installation And Operation Manual Download Page 141 | Manualshive

Page: 141 / 157

background image

Switched PDU
Installation and Operations Manual

Advanced Operations



141

Upload/Download

The Switched PDU family of product supports the ability to upload and download system configurations using a
standard FTP client. This feature enables for backup and restoration of system configuration as well as upload of
template configurations to ease large initial equipment deployments.

Upload/Download Command Summary

Command

Description

Set FTP Server

Enables or disables the FTP server

Show FTP

Displays FTP configuration information

Integrated FTP Server

The Switched PDU supports an integrated FTP Server which must be enabled for Upload/Download support. The
FTP Server supports a single user at a time. Once an administrative user has authenticated with the FTP Server,
standard FTP client commands can be used to upload or download PDU configurations.

NOTE:

The integrated FTP Server does not support web browser FTP file transfers. A non-web-browser is required for all

Upload/Download requests.

Enabling and disabling the FTP server:

The Set FTP Server command is used to enable or disable the integrated FTP server.

To enable or disable the FTP server:

At the Switched CDU: prompt, type

set ftp server

, followed by

enabled

or

disabled

and press

Enter

.

FTP Configuration Files

The FTP server supports upload/download of two configuration files: CONFIG.BIN and NETWORK.INI. These
files can be uploaded or downloaded using FTP PUT and GET operations.



CONFIG.BIN

This file contains the entire configuration of the PDU excluding TCP/IP settings,
serial/factory-only configurations, the x.509 certificate (SSL) and SSH keys. This file is
encoded to keep all data (including usernames, passwords, etc.) out of plain view.

You

cannot edit this file.



FTP.INI

This file contains only the FTP settings (FTP Host, username, password, filepath,
filename and automatic updates support). This file is user readable and editable ‘plain
text’ file.



NETWORK.INI This file contains only the TCP/IP settings (IP address, subnet mask, gateway, DNS1 and

DNS2). This file is user readable and editable plain text file.



SNTP.INI

This file contains only the SNTP settings (SNTP Hosts and GMT offset). his file is user
readable and editable plain text file.

NOTE:

The CONFIG.BIN file while encoded

is not encrypted and susceptible to decoding using simple tools. Server Technology

recommends the secure storage of CONFIG.BIN backup images.

«
...
139
140
141
142
143
...
»

Summary of Contents for Switched Rack PDU






























































































































































Reviews:

No comments

Related manuals for Switched Rack PDU

Brand: Keysight Technologies Pages: 197

TDS150-1SR Series

Brand: ERICO Pages: 2

Brand: Gifas Pages: 10

Brand: Vertiv Pages: 34

Digital Snake S-4000D

Brand: RSS Pages: 17

Brand: M-system Pages: 4

PX2-1000 SERIES

Brand: Raritan Pages: 648

DPAC1UT-AB-I-2-590

Brand: Unipower Pages: 9

Brand: iPower Pages: 26

Brand: Dataprobe Pages: 3

unimes H U-PW powerway

Brand: hager Pages: 82

DPI C13 3-phase PDU+

Brand: IMB Pages: 82

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands