SENTRON PAC4200 Manual Download Page 23

Page: 23 / 284

Description

3.1 Performance features of the SENTRON PAC4200

SENTRON PAC4200
System Manual, 09/2009, A5E02316180B-02

User-definable display of counters

●

Up to 5 displays for counters that can be labeled individually

Interfaces

●

Integrated Ethernet interface.

●

Two slots for operating optional expansion modules.
SENTRON PAC4200 supports a maximum of one communication module, e.g.

SENTRON PAC PROFIBUS DP or SENTRON PAC RS485. The second slot can be used

for other expansion modules.

Gateway

Gateway function:

This allows devices that only support serial communication (RS 485) to be addressed via

Ethernet.
●

Modbus gateway for integrating purely Modbus RTU slaves into an Ethernet network

(Ethernet Modbus TCP <=> RS 485 Modbus RTU)

●

Serial gateway for connecting RS 485 devices that support Modbus RTU and similar

protocols

Internal clock

●

Time stamping of events.

●

Synchronization of the load profile as an alternative to external synchronization.

●

Battery backup.

Long-term memory

●

Storage of load profiles.

●

Storage of events.

●

Battery backup.

Inputs and outputs

●

Two multifunctional integral digital inputs for tariff switching, time synchronization,

demand period synchronization, status monitoring, or capturing energy pulses from third-

party devices.

●

Two multifunctional integral digital outputs, programmable as pulse outputs for active

energy or reactive energy pulses, for showing the direction of rotation, indicating the

operating hours of SENTRON PAC4200, representing limit violations, or as switching

outputs for remote control via PC.

●

Up to 2 plug-in SENTRON PAC 4DI/2DO expansion modules with the same functions as

the integral digital inputs and digital outputs
This results in a maximum configuration of 10 digital inputs and 6 digital outputs.

Summary of Contents for PAC4200





























































































































































































































































































Search results

Summary of Contents for PAC4200

Reviews:

Related manuals for PAC4200

Brands by name

Popular brands

SENTRON PAC4200, Manual

Search results

Summary of Contents for PAC4200

Reviews:

Related manuals for PAC4200

Brands by name

Popular brands