Installation
5.7 Disassembling an expansion module
SENTRON PAC4200
System Manual, 09/2009, A5E02316180B-02
77
Figure 5-6
Deinstallation, releasing the locking hooks
See also
ESD guidelines (Page 273)
Disassembling an expansion module (Page 77)
Electrostatic sensitive devices (ESD) (Page 273)
5.7
Disassembling an expansion module
Disassembling
1.
Ensure safe isolation from supply.
2.
Observe the ESD Guidelines. Discharge yourself. Always hold the expansion module by
the plastic enclosure.
3.
Remove the terminal block from the expansion module, or detach the cable from the
terminal block.
4.
Unscrew the expansion module from the SENTRON PAC Power Monitoring Device.
5.
Remove the expansion module from the SENTRON PAC Power Monitoring Device.
6.
If necessary, disassemble the SENTRON PAC Power Monitoring Device.
