Parameterizing
9.2 Parameterizing the operator interface
SENTRON PAC4200
System Manual, 09/2009, A5E02316180B-02
155
Figure 9-15 "LIMIT LOGIC" device settings
LIM0, LIM1, ..., LIM11
Limit values used to generate the logically combined limit
"LIMIT LOGIC".
A higher-level logic function block with four inputs
supplies the result of the logic operation "LIMIT
LOGIC".
Four logic function blocks, each with four inputs, are
connected to these four inputs.
Logic function block with four inputs. Supplies the
output value to the input of the higher-level logic
function block.
Each of the four inputs can be assigned:
•
One of the twelve limit values LIM0 to LIM11
•
One of the digital inputs I0.0 or I0.1
Logic operations
Six logic operations:
AND, OR, XOR and their negations NAND, NOR,
XNOR
AND
AND logic operation: The output value is only true if
all input values are true. The output value is false if
any one of the input values or several input values
are false.
NAND
NOT AND logic operation: The output value is true if
any one of the input values or several input values
are false. The output value is only false if all input
values are true.
OR
OR logic operation: The output value is true if any
one of the input values or several input values are
true. The output value is only false if all input values
are false.
