SENTRON PAC4200 Manual Download Page 105

Page: 105 / 284

Startup

7.3 Parameterizing the device

SENTRON PAC4200
System Manual, 09/2009, A5E02316180B-02

105

7.3.3

Date and time

First, set the time zone and summertime. Then enter the date and time of day.

Note
Correct time measurement urgently requires specification of the time zone and a change of

time from normal to summertime.

The time zone refers to coordinated universal time (UTC).
"TIME ZONE" examples:
●

Value "-06:00" corresponds to UTC-6

●

Value "+01:00" corresponds to UTC+1

Procedure

Exit the measured value display and call the "MAIN MENU":

<F4>

In the main menu, go to the "SETTINGS" entry:

<F2>

or <F3>

Call the "SETTINGS" entry:

<F4>

In the "SETTINGS" menu, go to the "DATE/TIME OF DAY" entry:

<F2>

or <F3>

Figure 7-3

"DATE/TIME" device settings

Call the "DATE/TIME OF DAY" entry:

<F4>

The display shows the currently valid settings.

Go to the fields "DATE", "FORMAT", "TIME", "TIME ZONE", "DAYLIGHTSAVING":

<F2>

or <F3>

Open edit mode of the device setting:

<F4>

Set the correct value:

<F2>

and <F3>

Accept the value with:

<F4>

The value is permanently saved and becomes effective immediately.

The display returns to display mode.

10.

Return to one of the selection menus or to the measured values display:

<F1>

Summary of Contents for PAC4200





























































































































































































































































































Search results

Summary of Contents for PAC4200

Reviews:

Brands by name

Popular brands

SENTRON PAC4200, Manual

Search results

Summary of Contents for PAC4200

Reviews:

Brands by name

Popular brands