Operator control
8.1 Device interface
SENTRON PAC4200
118
System Manual, 09/2009, A5E02316180B-02
Selection bar
The selection bar indicates the menu entry that can be called with F4
.
F2
and F3
move the selection bar over the menu entries.
●
If all entries of the displayed menu can fit on the display, the selection bar moves across
the stationary menu entries.
●
If the menu list has more entries than can fit on the display, the display switches to scroll
mode. The selection bar remains stationary in the middle of the display. The menu list
rolls up and down "under" the bar.
Start of the list/end of the list
(1)
Separating line between the start of the list and end of the list
Figure 8-4
Start of the list/end of the list
In all menus, the end of the list is looped back in a circle to the start of the list. F3
jumps from the end of the list to the start of the list. F2
jumps from the start of the list to
the end of the list.
A separating line indicates the interface between the end of the list and the start of the list if
the menu contains more entries than can be shown on the display at one time.
Scroll bar of function key F1
The horizontal bar above function key F1 shows the multiple assignments of the function
key. The key assignment changes every time you press the key.
(1)
Scroll bar of function key F1
Figure 8-5
Scroll bar
