SENKO pellet SLIM MODERN stoves
–
Instruction manual
17
Adjoining walls must be constructed of brick or concrete, or other non-
flammable materials, i.e. protected with insulation. The stove emits heat,
especially on the firebox level, therefore,
no flammable or heat sensitive
objects must be placed nearby
(for example, alcohol, paper, plastic
objects…).
The stove must be installed with adherence to minimum prescribed
measures and constant control of the
safety distance from the walls and
the furniture
(
figure 3
). If the floor is made of flammable material (e.g.
wooden parquet) it must be protected with a single plate made of non-
flammable material which must be placed under and around the stove to
prevent floor overheating problems (
figures 2
and
3
–
floor protection
).
We recommend to install the stove as close to the smoke venting pipe
as possible, limiting the number of roundings to a minimum (
max 3 +
inspection and cleaning T-piece
) and chimney horizontal parts (
max total
3 m with a 3-
5° incline
)
see
4.5. Connection to chimney.
Flammable
objects
Non-flammable
objects
A
200 mm
100 mm
B
1500 mm
800 mm
C
300 mm
200 mm
Table 3
Figure 4
Summary of Contents for P 10 WATER+AIR Slim Modern
Page 1: ...INSTRUCTION MANUAL SN EN 719 PELLET STOVES SLIM MODERN P 8 AIR 8 kW P 10 WATER AIR 12 kW...
Page 14: ...SENKO pellet SLIM MODERN stoves Instruction manual 13 Figure 1a P 8 AIR SLIM MODERN...
Page 15: ...SENKO pellet SLIM MODERN stoves Instruction manual 14 P 10 WATER AIR SLIM MODERN Figure 1b...
Page 71: ...SENKO pellet SLIM MODERN stoves Instruction manual 70 Figure 43 a b c d e f g h...
