SENKO pellet SLIM MODERN stoves
–
Instruction manual
65
A properly cleaned burner pot guarantees proper functioning of the
stove. Should you, during burner pot feeding phase, notice that apart from
pellets,
a lot of sawdust and dust is falling into the burner pot
, you must
clean the pellet tank as soon as possible. Otherwise,
dangerous backfire
towards the pellet tank may occur.
If the described situation occurs again
after you have cleaned the tank, it means you are using low quality pellets.
Use pellets described in
chapter 2
!
Once a day (depending on pellet quality
– ash content) BE SURE
TO clean the burner pot!
Every time you remove the burner pot,
make sure you properly install it back
into the casing - OBLIGATORY CHECK
THAT THE IGNITER TUBE OVERLAPS
WITH THE HOLE ON THE LOWER PART
OF THE BURNER POT
– see
Figure 37a
!
Figure 37a
Figure 37
Summary of Contents for P 10 WATER+AIR Slim Modern
Page 1: ...INSTRUCTION MANUAL SN EN 719 PELLET STOVES SLIM MODERN P 8 AIR 8 kW P 10 WATER AIR 12 kW...
Page 14: ...SENKO pellet SLIM MODERN stoves Instruction manual 13 Figure 1a P 8 AIR SLIM MODERN...
Page 15: ...SENKO pellet SLIM MODERN stoves Instruction manual 14 P 10 WATER AIR SLIM MODERN Figure 1b...
Page 71: ...SENKO pellet SLIM MODERN stoves Instruction manual 70 Figure 43 a b c d e f g h...
